|
項目ltem |
特性Performance Characteristics |
|
使用溫度范圍
Operating Temperature Range |
-40to+105℃ |
-25to+105℃ |
|
額定電壓范圍
Rated Voltage Range |
6.3to100VDC |
160to400VDC |
|
電容量范圍
Capacitance Range |
0.47to10000μF |
0.47to220μF |
|
電容量允差
Capacitance Tolerance |
±20%（100Hz or120 Hz，+20℃） |
|
漏電流Leakage Current
（+20℃，最大max） |
I≤0.01CV或2（μA）額定工作電壓充電2分鐘后讀數，
取大者 After2 minutes,whichever is greater measured with rated working voltage applied |
I≤0.03CV（μA）)額定工作電壓充電2分鐘后讀數，取大者 After2 minutes,whichever is greater measured with rated working voltage applied |
|
損耗角正切值
Dissipation Factor
（tgδ） |
|
工作電壓WorkingVoltabe(VDC) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
100 |
160∽250 |
350∽400 |
|
D.F(%)最大 |
22 |
20 |
16 |
14 |
12 |
10 |
9 |
8 |
12 |
15 |
容量>1000μF時 ，每增加1000μF D.F值增加2%( 100Hz or 120Hz，+20℃)
For capacitance1000μF,Add 2%per another 1000μF (100Hz or 120Hz，+20℃) |
|
低溫特性
Low Temperature
Characteristics
（120Hz） |
阻抗比，最大Impedance ratio ,max
|
工作電壓Working Voltage(VDC) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63∽160 |
200 |
250 |
350∽400 |
|
Z - 25℃ / Z+20 ℃ |
4 |
3 |
3 |
3 |
3 |
3 |
2 |
2 |
3 |
5 |
|
Z - 40℃ / Z+20 ℃ |
8 |
6 |
4 |
6 |
5 |
4 |
3 |
6 |
6 |
6 |
容量>1000μF時 ，每增加1000μF ，Z - 25℃ / Z+20 ℃值增加0.5%, Z - 40℃ / Z+20 ℃值增加1% Fpr capacitance>1000μF , and 0.5% per another 1000μF for Z-25℃/Z+20℃, add 1% per another 1000μF for Z-40℃/Z+20℃ |
|
負荷壽命Load Life |
試驗條件 持續時間:
負荷壽命 2000h |
Test conditions Duration time:
LoadLife 2000h |
|
環境溫度:+105℃ |
Ambient timperature: +105℃ |
|
施加電壓:額定工作電壓(VDC) |
Applied voltage: Rated Working Voltage(DVC) |
|
試驗后要求:室溫下恢復16小時,+20℃測試 |
After test requirements: Resumde 16 hours at
normal temperature |
|
電容量變化:≤±25%規定值 |
Capacitance change:≤±25% of the initial measured value |
|
損耗角正切值:≤200%初始值 |
Dissipation Factor:≤200% of the initial specified value |
|
漏電流:≤規定值 |
Leakage Current:≤The initial specified value |
|
儲存壽命Shelt Life |
試驗條件 |
Test conditions |
|
持續時間:1000小時 |
Duration time: 1000hours |
|
環境溫度:+105℃ |
Ambient temperature:+105℃ |
|
施加電壓:無 |
Applied voltage: None |
|
試驗后要求:室溫下恢復16小時,+20℃測試 |
After test requirements: Resumed 16 hours at
normal timperature |
|
電容量變化:≤±20%規定值 |
Capacitance change:≤±20% of the initial measured value |
|
損耗角正切值:≤200%初始值 |
Dissipation Factor:≤200% of the initial specified value |
|
漏電流:≤200%規定值 |
Leakage Current:≤200% of the initial specified value |
